viral electro electricity generator make from old dc motor diy experiment
Do you have an idea how to make a viral Electro-electricity Generator? I am sure you will be surprised once you understand the concept. You can make this device by simply connecting two AC Motor Diodes in series. This will produce an output of 100 Volts of electricity.
Now, this is very simple electricity generator as its working principle is based on the Electric Pulse principles. What do we need? A DC Motor and a pair of AC Couplings. And if you want, you can add some more components like an accumulator, or a mini dynamo to produce a higher output of Voltage.
click here to see free energy experiments
How to build? First of all, you should connect the two DC motors in series. After that, you need to connect the AC circuits to the motor. The last step is to add a battery to produce a little bit of energy into the circuit to produce the voltage needed by the motor.
Now let’s see what we can do with this viral motor. First of all, if you want to produce enough energy to run your house for at least one or two days, then you can attach one or two of the AC Couples in series. If you want to have the whole system produce more energy than what your consumption can supply, then you can attach the DC motors in parallel. And then, if you want to have this generator as your main source of electricity, you can connect it in series. This way, you will have the ability to generate enough power for the entire system.
As we know, the motion of electric current is always in a state of change. This is also true for this motor and DC generator. As we know that electric power can be produced by a combination of motion of a DC motor and AC motor.
Let’s now try to understand how this electricity works. The process works like this. When an electric current flows through an insulated wire, a direct current is produced. In this process, we can use the term “voltage” instead of “energy”. We can divide the voltage produced by the current into the voltage required by your home. Lastly, we can adjust the value of R in order to control the amount of electricity needed by your electrical appliances.
Here is how we can use this viral electricity to our advantage. The first thing that we need to do is to take an insulated wire, which has the same length as the DC battery. Connect the two ends of the insulated wire. Once you have done that, attach a meter reader to the other end of the wire. Once the reading on the meter indicates the amount of energy needed, the value of R will be adjusted. This adjustment will make your life easier since you no longer have to buy or work for expensive energy.
The second step is to plug in the meter reader to a DC motor. Connect the motor to the batteries. Turn the electricity generator on. Your energy supply will now be powered by the DC batteries. And voila! Your homemade electricity generator is up and running!
You can even find parts of your old electric motor on eBay. Just find one that looks like it works and then you can replace a fuse or a wire. This way you can save some money from the meter since you don’t have to buy new ones. Another option is to sell the old fuse or wire to a company online. They will pay you about $3.00 for what was essentially your old electric motor. The only issue here is that you will have to know what you’re doing if you want to make a profit selling this type of stuff.
Finally, the last step is to hook up your new system to your home’s existing power supply. You can either use solar panels or a windmill to generate your own electricity. The choice is yours and I recommend a combination of both. As long as you have sufficient wind or sun power, you should have no problem getting your own source of green energy to supplement your power needs. If you’re going in this direction for the sole purpose of saving money, then skip over the solar panels. They are expensive and don’t really produce that much electricity compared to the other options.
Your new motor will need to be charged every now and then. Most batteries come with at least a one year warranty, so you can take that into account when charging your new system. You may also want to consider purchasing a charger if you can’t use your DC meter. This will make your life easier because you won’t have to constantly guess at how much current is flowing through your system. If you want to be completely green, make your own electricity. It is easy, cheap and it could ultimately save you a lot of money.