FUNCTION TABLE OF MULTI FUNCTION INPUT (H1).
0: 3 line system program control (forward / reverse command ).
1: local / remote selection (on operator off parameter setting).
2: selection / inverter selection (on is optional ).
3: when h3 – 05 ( multi functional multi speed command 1 analog input function selection ) is set to be auxiliary frequency command ( setting value :0 ) it is used together with (main speed /auxiliary speed switch ).
4: multi step command 2.
5: multi step command 3.
6 : jog frequency selection ( prior to multi speed control ).
7 : eceleration / acceleration time selection 1 .
8 : base locking command no (a connector , base is locked when it is on ).
9 : base coling command no ( b connector , base is locked when it is off ).
A : hold on acceleration / deceleration stop ( acceleration / deceleration is stopped when it is on the frequency dwells ).
B : inverter overheating for cast (o h 2 is displayed when on ) .
C : multi functional analog input selection ( multi functional analog input is effective while on ) .
D : v / f sensorless control with pg (speed feedback control is invalid while one ) (normal v/f control)
E : speed control integration reset ( integration control is invalid while on ) .
F : unused .
10 : up command ( please do not set it together with down command ) .
11 : down command ( please do not set it together with up command ) .
12 : fjog command , jog frequency d1-09 is in operation ) .
13 : r jog command ( on , jog frequency d1-09 reverse operation ).
14 :abnormal reset ( rising edge reset of on ) .
This blog is definitely rather handy since I’m at the moment creating an internet floral website – although I am only starting out therefore it’s really fairly small, nothing like this site. Can link to a few of the posts here as they are quite. Thanks much. Zoey Olsen