Moniter selection after power up
when the inverter is started, please set the item need to displey 1:frequency command
2:frequency command. 3:output current 4:the displayed item set by o1-01.
note:
when the inverter is started, to display the frequency command in data displaying part
(when factory setting is available) when the inverteris started, the display items can
be selected from frequency command, output frequency, output current or the item set in
o1-01 in the occasion where the items exept frequency need to displayed,plese change the
setting of this constant.
frequency unit of reference setting and moniter
to set the frequency command and monitering. the unit is 0:0.01hz 1:0.01% (the max. output
frequency is 100%) 2~38:r /min(to set the number of poles motor.)40~39999:user display
for the max output frequency.for example, to set the value according to the action speed
(mm/sum/min/, etc)
frequency units of constant setting
this constant can be used to set the setting unit of frequency relations constant
(e1-04,06,09 s’ etting unit ) 0: hz unit 1: r /min unit
note :
to change the setting unit of ei -04 , e1 – 06 e1- 09 the frequency unit shall not
be changed expect this . 01 – 04 the dedicated function of vector control with pg.
constant no diplay selection
to select the representation of keyboards’ constant no . 0: it usually represent
(a1- 00 etc) 1:the register address the memobus communication
local remote key able/ disable
o set the function of operation method selection key (local / remote) o: disabled
1: enable ( pressing the local/ remote/ key switches control of operation between
operator or the sources specified in constants b1 – 01 and b1 -02 .)) it is used to
set the function of top key
user constant initial value.
this constant is used to record or clear the user constant defaults.
0: no change (keep current settings.)
1:record user defaults. (record the current contant settings as user defaults)
2:clear user defaults (clear the recorded user defaults).
note:this constant is used to record or clear the user constant defaults.
the constant set by user can work as the user constant initial value to be recorded
by 440 volt electyric inverter. the digital operation diplay will return to 0 after
the setting have been made on 440 volt electric inverter.
Having read this I thought it was very informative. I appreciate you taking the time and effort to put this article together. I once again find myself spending way to much time both reading and commenting. But so what, it was still worth it!
I was wondering if you ever thought of changing the structure of your website? Its very well written; I love what youve got to say. But maybe you could a little more in the way of content so people could connect with it better. Youve got an awful lot of text for only having 1 or 2 images. Maybe you could space it out better?
It’s hard to find knowledgeable people on this topic, but you sound like you know what you’re talking about! Thanks