440 VOLT INVERTER,S TERMINALS TABLE
No | Name | Description | Setting range | Factory setting | Change During Option | Control methods | |||
v/f | v/f with pg | Open loop vector | Flux vector | ||||||
H4-03 | Bias (terminal 21) | To set the voltage level deviation of multi function analog value output 1 and make the output characteristic to be parallel to the value of displacement , it is set in unit of% with 10 volt taken as 100% $ Note : to output the gain of the multi function analog value . please set how many multiples of 10 volt the item, 100% output is . multi function analog output deviation is not set the up/down parallel displacement of output characteristics in unit of % and taking 10 volt as 100% . | -10.0~+10.0 | 0.0 | o | B | B | B | B |
H4-04 | Monitor selection (terminal 23) | Please set the code of the output monitoring items in multi functional analog output 2 (terminal 23) at the blank part of “u1-oo” Note : to adjust the constant please refer to h4-01 . | 1~38 | 3 | x | B | B | B | B |
H4-05 | Gain (terminal 23) | To set the voltage level gain of the multi function analog output 2. Please set how many multiples of 10 volt the 100% output of the monitored item. | 0.00~2.50 | 0.50 | o | B | B | B | B |
H4-06 | Bias (terminal 23) | Please set the voltage level bias of multi function analog output 2, et the amount that the output characteristic will be shifted vertically set this amount as a percentage with 10 volt corresponding to 100% note : please refer to h4-03 for constant adjustment . | -10.0~+10.0 | 0.0 | o | B | B | B | B |