440 volt inverter analog signal level setting table
No Name description Setting range Factory setting Change during operation Control methods v/f v/f with pg Open loop vector Flux vector H4-07 Analog output signal level selection The set signal…
440 volt inverter motor protection table
440 VOLT WINNER INVERTER,S MOTOR PROTECTION TABLE No Name Description Setting range Factory setting Change during operation Control methods v/f v/f with pg Open loop vector Flux vector L1-01 Motor…
power inverter safety instructions
Safety instructions Alert: This chapter includes important protection and working instructions. Check and protect this manual for the maintenance of the function. 1. Before using the unit, studying all the…
power inverter
power inverter,s stall functions stall prevention selection during running. stall prevention function selection during operation. 0 : non effective . 1 : effective deceleration time 1. 2 : effective deceleration…
inverter torque system
torque detection selection 1. to set the torque detection function 0:overtorque detection disabled.1:detection during speed gree only/ operation continuos after detection (minor fault) 2:detection during run /operation continuous after detection…
inverter,s speed protection
forward torque limit set the torque limit values as a percentage of the motor rated torque.four indevidual regions can be set. reverse torque limit note: torque limits can be set…
inverter frequency
monitor selection after power up when the inverter is started please set the item need to display 1: frequency command 2: frequency command. 3: output current 4:the displayed item set…
3 phase inverter selaction
user constant initial value this constant is used to record or clear the user constant defaults . 0: no change .(keep current setting.) 1: record user defaults .( record the…
inverter display
exception analysis when the inverter is at fault, the operator will have the exception display and output the action of fault contact. at the same time, the inverter’s output will…