winner inverter acceleration time setting

Win- va /vc,s deceleration / acceleration time has 4 options , to switch between these time option , please set deceleration / acceleration time option 1 ,2  at multi function input . setting value 7 = acceleration / deceleration time selection 1 . setting value 1 a =  acceleration / deceleration time selection 2 . … Read more

danfoss inverter

When terminal 14 is used as frequency command  please h3-09 (frequency command (current ) terminal 14 function selection ) to be if otherwise if you use this function fault (o p e 03)  will occur . when h3 -09 (frequency command ( current ) terminal 14 function selection ) is set as if but multi … Read more

WINNER INVERTER,S UP / DOWN COMMAND SETTING 10, 11.

It is the function to control the inverter,s output frequency through the control terminal,s on/off . when using this function please make sure to set the 2 multi function input up/down command .if only to set single multi function input the fault ope 03 will occur .besides in the occasion where acceleration /deceleration stop was … Read more

winner inverter fault setting

In the occasion where up/down was set multi step peed command 1~8 will be all non effective . the dwell output frequency when up/down is on will be memorized by the value of d4-01 (dwelling function option of frequency command) the setting value is 1 . the value will be recorded after the power is … Read more

winner dc braking command

Maximum output frequency / exterior search command 1 (setting , 61 ). off = normal action . on = start speed search from maximum output frequency . Setting frequency / exterior search command 2 (setting , 62) . off = normal action . on = start speed search  from the et frequency ( the command … Read more