electric inverter frequency reference when the multi function inputs jog frequency reference selection f jog command and r jog command are on.the electric inverter frequency reference default value and set value will change when 0 1-0 3 is changed, for example if preset reference 1 is set to 6.00 Hz and 01-03 is changed to … Read more
set only to fine adjust v/f for the output range when using flux vector control of frequency speed and voltage of inverter .normally this setting range and factory setting will be cut by 50% for the inverter of 200v class . to set the constant e 1-0 4 ~e 1-10 when e 1-0 3 =”f” … Read more
motor system in inverter MOTOR 2 LINE TO LINE RESISTANCE . To set the motor,s line to line resistance in unit of ohm . note: the factory setting depends on the capacity of the inverter . please set the motor,s line to line resistance u v v – w w u normally you need to … Read more
Finding the Best Inverter Dc to Ac inverter dc to ac Inverter Dc to Ac – Overview Generally, as soon as an inverter is in over-power mode, it simply suggests that it’s going to sacrifice the surplus power. There are not any inverters used inside the computer system. The smallest inverters are somewhat more portable … Read more
PANEL/REMOTE SETTING VALUE 1. OFF:To select frequency command (b1-01) and operation command (b1-02). ON : Set frequency command/operation command by digital operator . To switch the input method between frequency command and operation command . To switch only at the stop of inverter . Once the function was set digital keyboard operation method selection key … Read more
Win- va /vc,s deceleration / acceleration time has 4 options , to switch between these time option , please set deceleration / acceleration time option 1 ,2 at multi function input . setting value 7 = acceleration / deceleration time selection 1 . setting value 1 a = acceleration / deceleration time selection 2 . … Read more