electric inverter torque reference
TORQUE REFERENCE DELAY TIME . the primary delay time constant of torque command filter is set in unit of m r s to adjust the electric inverter torque reference time…
frequency speed and voltage of inverter
set only to fine adjust v/f for the output range when using flux vector control of frequency speed and voltage of inverter .normally this setting range and factory setting will…
motor system
motor system in inverter MOTOR 2 LINE TO LINE RESISTANCE . To set the motor,s line to line resistance in unit of ohm . note: the factory setting depends on…
WINNER,S OPERATION SELECTION AT OVER SPEED
OPERATION SELECTION AT OVER SPEED/ DEVIATION . winner inverter set the stop method when over speed occurs.0:deceleration to stop using deceleration time 1 (c 1-0 2). 1: coast to stop.…
inverter speed value
inverter speed value . Enable /disable integral value during ace/decal , 0: disable (the integral function is not used while accelerating or decelerating : it is used at constant speed).…
digital systems
DIGITAL SYSTEMS INPUT OPTION OF INVERTER. To set the input method of digital command card . 0: bcd . 1% 1: bcdo . 1% 2: bcdo. 01% unit 3: bcd…
3 phase inverter
3 PHASE INVERTER OUTPUT MODE SELECTION . Set the 3 phase inverter output mode in the following constants when using a d0-08 digital output card 0: – channel individual outputs…
inverter dc to ac
Finding the Best Inverter Dc to Ac inverter dc to ac Inverter Dc to Ac – Overview Generally, as soon as an inverter is in over-power mode, it simply suggests…
inverter panel
PANEL/REMOTE SETTING VALUE 1. OFF:To select frequency command (b1-01) and operation command (b1-02). ON : Set frequency command/operation command by digital operator . To switch the input method between frequency…
winner inverter acceleration time setting
Win- va /vc,s deceleration / acceleration time has 4 options , to switch between these time option , please set deceleration / acceleration time option 1 ,2 at multi function…